Items:, Value:

Suspension EP2

Online Catalogue | Honda | Civic EP2 Type S |  Suspension EP2

Part: BC-RCK-DC5-BK Buddy club DC5/EP3/EP2/EP1 rear Camber Kit
Part: BC-RCK-DC5-BK Buddy club DC5/EP3/EP2/EP1 rear Camber Kit
Buddy club Japan

Rear Camber Kit

Left & Right Handed



Price: £151.58 / €181.90 (Including VAT at 17.5%)


Quantity:  

Part: EB-5-81280K Eibach Pro Alignment Kit
Part: EB-5-81280K Eibach Pro Alignment Kit
When you change your vehicles ride height you can expect to change your vehicles suspension geometry at the same time. Camber is the most severe change which will affect tyre wear and the handling of you car. Eibachs Pro Alignment kits allow you to tune your cars handling and reduce uneven tyre wear.
The new EZ Cam XR is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle. MasterPaks of 10 are available.

This product allows adjustment by ±1.75°

Price: £25.53 / €30.64 (Including VAT at 17.5%)


Quantity:  

Part: EB-PRO-EP3-2 Eibach Pro Kit
Part: EB-PRO-EP3-2 Eibach Pro Kit
The Eibach Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. Every Eibach Pro-Kit is designed and tested to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality.


Best Combination of Looks, Handling and Ride Quality
Lower Center of Gravity-Lowers Vehicle 25-40mm
Each Kit Specifically Tuned and Tested for Your Vehicle
World´s Best Quality, Precision and Corrosion Resistance
Million-Mile Warranty
95% Of Kits Are TÜV Approved

Price: £136.24 / €163.49 (Including VAT at 17.5%)


Quantity:  

Part: D2-1-10 D2 Racing Lower Control ARms
Part: D2-1-10 D2 Racing Lower Control ARms
D2 Racing Sport

Fits:ES1/EP3 Rr LWR CONTROL ARMS(pr)

Price: £106.93 / €128.32 (Including VAT at 17.5%)


Quantity:  

Part: D2-1-3 D2 Racing Camber Kit
Part: D2-1-3 D2 Racing Camber Kit
D2 Racing Sport

Fits: ES1/EP2/EP3/DC5 REAR CAMBER KIT

Price: £85.78 / €102.94 (Including VAT at 17.5%)


Quantity:  

Part:D2-H15 D2 Racing Coilovers EP3
Part:D2-H15 D2 Racing Coilovers EP3
D2 racing Sport Coil-Over Kit

D2 Racing Sports has produced a high quality complete coil over system for our automotive needs. Giving the enthusiast the perfect coil over system which is fully adjustable with a 36 point damping adjustment, adjustable ride height, and even camber adjustability for some applications. D2 Racing Coilovers are the solution to upgrading your suspension without the hassle of having to purchasing everything separately and worrying about compatibility issues.

D2 Racing Coilovers
D2 Racing Coilovers Feature:

* Fully adjustable (36-way dampening(51mm shocks), and ride height)
* Custom spring rates (3.5, 5, 7, 9, 11, 13, 15, 18, and 22 kg/mm)
* Pillow ball mounts included w/ camber plates!
* Telflon-coated threads
* Flawless CNC finish
* 2 Keys for adjusting ride height
* Carefully matched spring and damper rates
* 1 year warranty




Backed by our 12 Months Manufacturers warranty unlike the eBay items which have no warranty attached.


Backed by our 12 Months Manufacturers warranty unlike the eBay items which have no warranty attached.


Price: £595.00 / €714.00 (Including VAT at 17.5%)


Quantity:  

Part: BC-RSD-EP3 BUDDYCLUB RACE SPEC DAMPERS EP3 CIVIC
Part: BC-RSD-EP3 BUDDYCLUB RACE SPEC DAMPERS EP3 CIVIC
RACE SPEC DAMPERS EP3 CIVIC

The Buddy Club Racing Spec Damper has been developed based on the data collected from both actual race cars.

Depending on different applications, adequate spring rates, damping force adjustment, and enough damper strokes were all put in to consideration to create one of the best available and most balanced suspension systems for the drifting and circuit enthusiasts alike.

Features:
- All strut type suspensions use inverted shocks for more horizontal stability.because strut type suspensions absorb the shock directly from the road, it requires a high strength design. --
Buddy Club utilizes the inverted shock design for its high durability. The inverted shock tubes are manufactured with corrosion free chrome plated steel.
15 Way compression:

15 Way compression/rebound adjustment.15 different settings are possible with just a simple click on a knob. Inverted shocks have the adjusting knob on the top of the shaft. The others have the knob on the bottom of the shell case.

The basic compression (softest setting) offers firm but comfortable ride for daily street use of the suspension kit. About 4kg/mm spring rate increase is expected with the damping force set to all the stiffest settings.

Mono Tube Design:

All Racing Spec Damper uses the mono tube design shell case instead of an inferior ordinary cartridge type. Strut type applications use a 36mm piston and wishbone type uses an extremely large 46mm piston for greater control of the damping force.

Spring Seat, Lock Seat.

This aluminium material spring seat/lock seat will let you adjust the height 2mm for every one full complete turn. By using the preload able adjusting bracket it is now possible to change the spring pre-load without changing the vehicle height.

Where applicable steering response will be dramatically improved by adding upper pillow ball mounts instead of the factory rubber bushing. In case slotted lower bracket will also increase steering effect.

Aluminium upper mounts will let you adjust the camber on several strut type suspension kits. Otherwise a slotted lower bracket will do similar.

Ultra High quality springs are used on all of our suspension kits. A special coating gives extra protection against any corrosion caused by the every day driving.

Buddy Club has eliminated the need for helper springs by using the adjustable bracket system. A super low ride-height is possible without having any free play of the springs. One complete turn of the adjusting bracket will lower the ride-height approximately 2mm. The shell case finish is an off black coating to prevent corrosion and offer a high quality feel.


Price: £1,488.73 / €1,786.48 (Including VAT at 17.5%)


Quantity:  

Part: BC-N+-EP3  N+SPEC DAMPERS EP3
Part: BC-N+-EP3 N+SPEC DAMPERS EP3
N+ SPEC DAMPER from Buddy Club is the choice complete suspension setup with resemblance of RACING SPEC damper's excellent attributes. It is cost effective and is well rounded for the budget minded weekend club racer.
fully sericable

With urethane isolated pillow-ball upper mount design, engineered spring rates, 15 level damper adjustments, and ride height adjustment capabilities, the N+ SPEC DAMPER can accommodate any driver's preferences.

Complete with top mounts
Ships Next Day ....

Price: £975.25 / €1,170.30 (Including VAT at 17.5%)


Quantity:  

Online Catalogue | Honda | Civic EP2 Type S |  Suspension EP2