Engine OIL & Lube

Online Catalogue | Service Parts & OIL |  Engine OIL & Lube

Part: CRO 10w40 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CRO 10w40 DESCRIPTION: Competition running in oil for test bed running. Advanced formulation of high quality solvent refined mineral oils fortified with special low volatility components and appropriate additive treatment. APPLICATION: Use as received for test bed running. May also be used for light operational duties up to 500 mls/800kms. Developed for modified petrol and Diesel engines. USER BENEFITS: • CRO 10w40 is formulated to meet the needs of the professional engine builder. • Maximises power output by optimising bedding in process. • CRO 10w40 provides full protection of highly stressed components whilst allowing optimum bedding in process for piston rings and bore. • CRO 10w40 additive technology enables full load runs for short bursts. • The viscometrics selected ensure that even though the additive system performance is strong the pistons can achieve satisfactory boundary lubrication for bedding purposes. PERFORMANCE PROFILE: • Suitable for 5 hours test bed running or 500mls/800km on road. • Optimum oil temperature 85-115°C. • Very low leak down [4%] after controlled test bed running. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 10w40 Specific Gravity @ 15°C ... 0.879 Kinematic Viscosity @ 100°C ... 13.7cSt Kinematic Viscosity @ 40°C ... 96cSt Viscosity Index ... 140 Pour Point °C ... -25 Flashpoint °C ... 165 Cold Crank Viscosity @ -25°C ... 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 5736 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £19.68 / €23.62 (Including VAT at 17.5%) Quantity:

Part: CFS 5w40 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 5w40 DESCRIPTION: Competition full synthetic engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with the latest additive technology for maximum performance. APPLICATION: Use as received for competition or modified engines where maximum power release is the preferred criteria. Formulated for high revving engines used in circuit racing or for larger engines for short duration i.e. hill climbs and sprints. USER BENEFITS: • Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stress areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up. • Excellent thermal stability and oxidation resistance. • The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance. • CFS 5w40 provides the optimum balance between hydrodynamic and boundary lubrication and the power absorbed through pumping losses to ensure maximum power release.. PERFORMANCE PROFILE: • Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4. • Ideal for fast road or track day use, especially in engines where a 5w30 is normally specified. • Suitable for operating at 125°C with peak temperatures up to 150°C. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 5w40 Specific Gravity @ 15°C ... 0.862 Kinematic Viscosity @ 100°C ... 14.0cSt Kinematic Viscosity @ 40°C ... 75cSt Viscosity Index ... 190 Pour Point °C ... -30 Flashpoint °C ... 210 Cold Crank Viscosity @ -30°C ... 6,600cP HEALTH AND SAFETY: Health and Safety Data Sheet 5836 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £54.45 / €65.34 (Including VAT at 17.5%) Quantity:

Part: CFS 0w20 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 0w20 DESCRIPTION: Competition full synthetic engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters, combined with the latest additive technology for maximum performance. APPLICATION: Use as received for competition engines where maximum power release is the preferred criteria, especially for qualifying or shorter duration events where the engine has been designed for this type of crankcase lubricant. Intended for racing and track use only – not recommended for road use. USER BENEFITS: • Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stress areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up. • Excellent thermal stability and oxidation resistance. • Reduced internal friction and pumping losses. • The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance. • CFS 0w20 provides the optimum balance between hydrodynamic and boundary lubrication and the power absorbed through pumping losses to ensure maximum power release and minimum drag. PERFORMANCE PROFILE: • Formulated for modern high revving engines used in circuit racing or for events such as hill climbs and sprints. • Ideal for use as a qualifying oil. • Suitable for operating at 125°C with peak temperatures up to 150°C. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 0w20 Specific Gravity @15°C ... 0.854 Kinematic Viscosity @100°C ... 8.6cSt Kinematic Viscosity @40°C ... 43.0cSt Viscosity Index ... 183 Pour Point °C ... -40 Flashpoint °C ... 200 Cold Crank Viscosity@ -35°C ... 5,750cP HEALTH AND SAFETY: Health and Safety Data Sheet 6165 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £89.98 / €107.98 (Including VAT at 17.5%) Quantity:

Part: CFS 10w40 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 10w40 DESCRIPTION: Competition full synthetic petrol/Diesel engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with the latest additive technology for maximum performance. APPLICATION: Use as received for competition or modified engines where maximum performance is required. USER BENEFITS: • Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stress areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up excellent thermal stability and oxidation resistance. • The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance. • CFS 10w40 additive technology is formulated to protect high revving competition engines from modern 16-valve twin OHC to older pushrod OHV engines. PERFORMANCE PROFILE: • Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4. • For fast road use or track days in engines where a 5w40 is normally specified. • Suitable for operating at 125°C with peak temperatures up to 150°C. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 10w40 Specific Gravity @ 15°C ... 0.867 Kinematic Viscosity @ 100°C ... 15.6cSt Kinematic Viscosity @ 40°C ... 90cSt Viscosity Index ... 185 Pour Point °C ... -25 Flashpoint °C ... 210 Cold Crank Viscosity @ -25°C ... 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 5533 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £54.45 / €65.34 (Including VAT at 17.5%) Quantity:

Part: CFS 10w50 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 10w50 DESCRIPTION: Competition full synthetic engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with latest additive technology for maximum performance. APPLICATION: Use as received for competition, modified and high performance engines. Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards. USER BENEFITS: • Fully synthetic oils provide many outstanding performance benefits over conventional mineral oils. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stressed areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up. • Excellent thermal stability and oxidation resistance. • The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance. • CFS 10w50 is especially suited to modified, high performance vehicles, with or without turbochargers, for fast road and track day use. PERFORMANCE PROFILE: • Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4. • Suitable for operating at 125°C with peak temperatures up to 150°C. • For fast road use or track days in engines where a 10w40 is normally specified. TYPICAL CHARACTERISTICS: SAE Viscosity Grade 10w50 Specific Gravity @15°C 0.869 Kinematic Viscosity @100°C 19.0cSt Kinematic Viscosity @40°C 125cSt Viscosity Index 205 Pour Point °C -25 Flashpoint °C 200 Cold Crank Viscosity@ -25°C 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 6253 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £54.45 / €65.34 (Including VAT at 17.5%) Quantity:

Part: CFS 10w60 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 10w60 DESCRIPTION: Competition full synthetic petrol/Diesel engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with latest additive technology for maximum performance. APPLICATION: Use as received for competition or modified engines. Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards. USER BENEFITS: • Fully synthetic oils provide many outstanding performance benefits over conventional mineral oils. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stressed areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up. • Excellent thermal stability and oxidation resistance. • The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance. • CFS 10w60 is formulated to protect both petrol and Diesel competition engines operating under extreme conditions e.g. long distance racing, rallying in both normally aspirated and turbo-charged engines. PERFORMANCE PROFILE: • Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4. • Suitable for operating at 125°C with peak temperatures up to 150°C. • Offers exceptional protection, especially where subject to severe and high stress conditions. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 10w60 Specific Gravity @ 15°C ... 0.867 Kinematic Viscosity @ 100°C ... 22.0cSt Kinematic Viscosity @ 40°C ... 125cSt Viscosity Index ... 205 Pour Point °C ... -25 Flashpoint °C ... 200 Cold Crank Viscosity @ -25°C ... 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 5505 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £60.54 / €72.65 (Including VAT at 17.5%) Quantity:

Part: CFS 15w60 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CFS 15w60 DESCRIPTION: Competition full synthetic petrol/Diesel engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with latest additive technology for maximum performance. APPLICATION: Use as received for competition or modified engines typically in highly stressed endurance conditions. Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards. Ideal for large capacity V8 engines in all forms of motorsport. USER BENEFITS: • Full synthetic oils provide many outstanding performance benefits over conventional mineral oils. • By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to ‘shear’ and viscosity loss in highly stressed areas. Full synthetic oil provides: • Load carrying capacity many times that of mineral oil. • High film strength for ultimate protection. • Outstanding cold flow properties for reduced wear at start up. • Excellent thermal stability and oxidation resistance. • The incorporation of a synergistic blend of three esters gives improved lubricity, reduced friction, enhancing the oils performance. • CFS 15w60 is formulated to protect larger competition engines both petrol and Diesel, operating under extreme conditions e.g. long distance racing, rallying in both normally aspirated and turbo-charged engines. PERFORMANCE PROFILE: • Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4. • Suitable for operating at 125°C with peak temperatures up to 150°C. • Offers exceptional protection, especially where subject to severe and high stress conditions TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 15w60 Specific Gravity @ 15°C ... 0.862 Kinematic Viscosity @ 100°C ... 22.0cSt Kinematic Viscosity @ 40°C ... 135cSt Viscosity Index ... 190 Pour Point °C ... -20 Flashpoint °C ... 195 Cold Crank Viscosity @ -20°C ... 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 5506 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £60.54 / €72.65 (Including VAT at 17.5%) Quantity:

Part: COR 20w50 5 Litre Bottle PRODUCT NAME AND VISCOSITY: COR 20w50 DESCRIPTION: COR 20w50 is a high performance synthetic fortified competition engine oil especially developed for short oval racing engines requiring a 20w50 viscosity. It is based on the highest quality performance additives and shear stable viscosity improvers in synthetic and mineral base oils. APPLICATION: Use as received for lubrication of competition engines derived from production engines. Ideally suited for use in competition engines e.g. Rover V8, Ford Kent and Pinto engines in all sectors of motorsport. USER BENEFITS: • Cost effective. • Sophisticated performance additive package. • Maximum engine protection. • Minimum power loss. • Synthetic fortified formulation. PERFORMANCE PROFILE: TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 20w50 Specific Gravity @ 15°C ... 0.888 Kinematic Viscosity @ 100°C ... 21.0cSt Kinematic Viscosity @ 40°C ... 160cSt Viscosity Index ... 150 Pour Point °C ... -15 Flashpoint °C ... 200 Cold Crank Viscosity @ -15°C ... 9,500cP HEALTH AND SAFETY: Health and Safety Data Sheet 5411 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £25.03 / €30.04 (Including VAT at 17.5%) Quantity:

Part: CSS 10w40 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CSS 10w40 DESCRIPTION: High performance competition semi-synthetic engine oil. Combination of the highest quality and latest performance additives in synthetic and mineral base stocks. APPLICATION: As received for engine lubrication of high performance car or motorcycle engines. USER BENEFITS: • The latest lubricant technology has been utilised to provide a catalytic converter compatible oil, engineered to meet the demands of today’s competition engines and conditions. • Sophisticated performance additive package. • Semi-synthetic base fluid. Provides maximum engine protection and minimum power loss. • Suited for modern high performance engines with or without turbo chargers. PERFORMANCE PROFILE: TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 10w40 Specific Gravity @ 15°C ... 0.880 Kinematic Viscosity @ 100°C ... 14.0cSt Kinematic Viscosity @ 40°C ... 83cSt Viscosity Index ... 175 Pour Point °C ... -25 Flashpoint °C ... 205 Cold Crank Viscosity @ 25°C ... 7,000cP HEALTH AND SAFETY: Health and Safety Data Sheet 5221 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £38.58 / €46.30 (Including VAT at 17.5%) Quantity:

Part: CSS 20w60 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CSS 20w60 DESCRIPTION: Very high performance competition semi-synthetic engine oil for older engines, based on highest quality performance additives and shear stable viscosity improvers in synthetic and mineral base. APPLICATION: Use as received for lubrication of competition engines derived from production engines manufactured between post war period and early 80s. Specially designed high viscosity formulation to protect competition engines running at very high temperatures and/or endurance events. Ideally suited for use in high performance competition engines such as Jaguar, Austin Healey, MG, TR, Aston Martin as well as American V8’s. Ideally suited to modified Ford Kent and Pinto engines in all sectors of motorsport. USER BENEFITS: • Sophisticated performance additive package in semi-synthetic base fluid formulation provides maximum engine protection and minimum power loss in engines designed to run on period formulations. • Viscometrics reduce oil consumption making this oil particularly suitable for long distance events. • Formulated to provide high temperature protection which ensures that oil pressure will be maintained under extreme conditions. • Incorporation of semi-synthetics helps reduce drag, and increase power due to improved flow rates PERFORMANCE PROFILE: TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 20w60 Specific Gravity @15°C ... 0.888 Kinematic Viscosity @100°C ... 24.0cSt Kinematic Viscosity @40°C ... 170cSt Viscosity Index ... 155 Pour Point °C ... -23 Flashpoint °C ... 210 Cold Crank Viscosity@ -20°C ... 9,500cP HEALTH AND SAFETY: Health and Safety Data Sheet 6254 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £40.62 / €48.74 (Including VAT at 17.5%) Quantity:

Part: CTV 20w50 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CTV 20w50 DESCRIPTION: Very high performance semi-synthetic competition oil for engines which have their transmission in the sump such as the original Mini. Extra high performance engine oil based on the highest quality performance additives and shear stable viscosity improvers in synthetic and mineral base. APPLICATION: Competition use on vehicles where the engine and transmission share the same oil. Especially suitable where a limited slip differential is used. Also suitable for all gearboxes which specify a 20w50 engine oil. USER BENEFITS: • The semi-synthetic base fluid formulation and special additive system provides maximum engine protection along with transmission performance to API GL4 level, the normal performance level demanded for gearboxes. • Also suitable for conventional engines which have heavily loaded skew gears, often due to running high oil pressure. • The incorporation of synthetics means the lubricant has flow rates close to many 15w grades, helping to reduce drag and increase power output without any detrimental effect on centre main bearings. • Viscometrics reduce oil consumption, making this oil suitable for long distance racing. • CTV has a formulation with a viscosity at the top end of an SAE 50 ensuring oil pressure will be maintained under arduous conditions. PERFORMANCE PROFILE: • All competition and highly tuned derivatives of original Mini. • Also suitable for other highly tuned vehicles with shared engine/transmission oil including motorcycles. TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 20w50 Specific Gravity @ 15°C ... 0.885 Kinematic Viscosity @ 100°C ... 21.0cSt Kinematic Viscosity @ 40°C ... 170cSt Viscosity Index ... 146 Pour Point °C ... -15 Flashpoint °C ... 215 Cold Crank Viscosity @ 15°C ... 9,500cP HEALTH AND SAFETY: Health and Safety Data Sheet 5492 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £45.98 / €55.18 (Including VAT at 17.5%) Quantity:

Part: CB 40 5 Litre Bottle PRODUCT NAME AND VISCOSITY: CB 40 DESCRIPTION: Competition castor engine oil. Highest quality castor oil with unique anti-oxidant system for enhanced performance. APPLICATION: All 4 stroke car or motorcycle engines which require a vegetable based oil. For use in engines running methanol or alcohol based fuels. USER BENEFITS: • Extensively used in speedway for many years. • Outstanding wear protection due to extra load-carrying additives and natural lubrication properties of ‘Castor’. • Enhanced anti-oxidant performance. • Note: Conventional mineral/synthetic lubricants are incompatible with Castor based oils. PERFORMANCE PROFILE: TYPICAL CHARACTERISTICS: SAE Viscosity Grade ... 40 Specific Gravity @ 15°C ... 0.942 Kinematic Viscosity @ 100°C ... 14.0cSt Kinematic Viscosity @ 40°C ... n/a Viscosity Index ... n/a Pour Point °C ... n/a Flashpoint °C ... 185 Cold Crank Viscosity ... n/a HEALTH AND SAFETY: Health and Safety Data Sheet 5003 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £43.43 / €52.12 (Including VAT at 17.5%) Quantity:

Online Catalogue | Service Parts & OIL |  Engine OIL & Lube